Basic Info.
Installation
Packaged Boiler
Water Circulation
Forced Circulation
Drum Placement
Horizontal Boiler
Burning Style
Chamber Combustion Boiler
Transport Package
Seaworthy Exportable Packing
Specification
capacity: 1-20 tph
Product Description
Product Description
WNS Oil Gas Fired industrial Steam Boiler with China or ASME Standard
Rated Steam Output: 1-20 tph.
Rated Steam Pressure: 10-16 bar.
Steam Temp: 184/194/206 degree C.
Brief Introduction
This type of boiler is fire tube steam boiler which adopts three-pass structural and corrugated furnace structure, and the outlet surface of the boiler is covered by water.
The whole equipment consists of boiler shell, furnace gallbladder, switching smoke chamber and smoke pipe, etc.Boilers adopt threaded flue gas tubes with high heat transfer efficiency, which improves the heat transfer effect of flue gas tubes.
Boiler adopts low-level combustion chambers, which make the safe range of water level of boilers wider, the steam space of boilers larger and the steam quality better guaranteed.
Steel fin tube energy saver is arranged at the tail of the boiler, which has high heat transfer efficiency and reduces fuel consumption.
The boiler has an overhaul door hole, which is convenient to overhaul.
Schematic Diagram
Product Parameters
| Model | WNS1 | WNS2 | WNS3 | WNS4 | WNS5 | WNS6 | |
| Rated Steam Output (t/h) | 1 | 2 | 3 | 4 | 5 | 6 | |
| Design pressure(Mpa) | 1.0/1.25/1.6 | 1.0/1.25/1.6 | 1.0/1.25/1.6 | 1.0/1.25/1.6 | 1.0/1.25/1.6 | 1.0/1.25/1.6 | |
| Rated steam temperature(ºC) | 184/194/205 | 184/194/206 | 184/194/207 | 184/194/208 | 184/194/209 | 184/194/210 | |
| Feed water temperature(ºC) | 20 | 20 | 20 | 20 | 20 | 20 | |
| Thermal efficiency With Condenser(%) | 100.5 | 100.5 | 100.1 | 100.4 | 100.5 | 100.5 | |
| Proper Water Volume(m³) | 4.1 | 7.2 | 7.5 | 8.2 | 8.4 | 14.5 | |
| Heating area: Proper(m2) | 25.32 | 54.4 | 89.4 | 102.5 | 147.1 | 160.17 | |
| Heating area: Economizer(m2) | 7.93 | 12.8 | 19.3 | 19.9 | 33 | 33 | |
| Heating area: Condenser(m2) | 11.12 | 19.3 | 39.6 | 59.7 | 66.1 | 66.1 | |
| Design Fuel | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | |
| Fuel Consumption(light oil) | 65.7 | 131.5 | 197.24 | 257.3 | 325.79 | 381 | |
| Fuel Consumption(Natural Gas) | 79.64 | 158.77 | 228.3 | 313.6 | 396.155 | 475.6 | |
Dimension of Largest Part
L×W×H(m) | 3.9x2.02x2.35 | 4.5x 2.1x 2.6 | 5.1x2.2x2.8 | 5.66x2.2x2.8 | 6.25x2.54x3.27 | 6.65x2.54x3.27 | |
| Boiler Weight (ton) | 5.7 | 7.7 | 10.7 | 11.2 | 15.4 | 16.5 | |
| | | | | | | | |
| Model | WNS8 | WNS10 | WNS12 | WNS15 | WNS20 | | |
| Rated Steam Output (t/h) | 8 | 10 | 12 | 15 | 20 | | |
| Design pressure(Mpa) | 1.0/1.25/1.6 | 1.0/1.25/1.6 | 1.0/1.25/1.6 | 1.0/1.25/1.6 | 1.0/1.25/1.6 | | |
| Rated steam temperature(ºC) | 184/194/211 | 184/194/212 | 184/194/213 | 184/194/214 | 184/194/215 | | |
| Feed water temperature(ºC) | 20 | 104 | 20 | 104 | 104 | | |
| Thermal efficiency With Condenser(%) | 100.2 | 100.5 | 100.2 | 100.2 | 92.1 | | |
| Proper Water Volume(m³) | 14.5 | 20 | 25.8 | 27 | 30.5 | | |
| Heating area: Proper(m2) | 230.6 | 263.88 | 361.2 | 384.6 | 449.8 | | |
| Heating area: Economizer(m2) | 57.2 | 92.8 | 73.4 | 171.4 | 241.98 | | |
| Heating area: Condenser(m2) | 92.8 | 92.8 | 117.5 | 171.4 | 282.2 | | |
| Design Fuel | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | liht oil,natural gas,biogas,coke gas | | |
| Fuel Consumption(light oil) | 525.2 | 565.2 | 786.42 | 880 | 1427.66 | | |
| Fuel Consumption(Natural Gas) | 637.5 | 676.8 | 996.91 | 1070.5 | 1427.5 | | |
Dimension of Largest Part
L×W×H(m) | 6.5x2.72x3.33 | 7.1x2.72x3.33 | 7.7x3.02x3.66 | 7.9x3.25x3.66 | 8.6x3.46x3.58 | | |
| Boiler Weight (ton) | 23.4 | 23.1 | 29.8 | 33.9 | 38.3 | | |
Main Parts Processing
Packaging & Shipping
Company Profile
About US
Jiangsu soho Honry Imp. &Exp. Co., Ltd is a state-owned company, which hold SUTEX BOILER brand, and select the boiler maker as our ODM, which is a professional manufacturing company, founded in 1991, for boiler and pressure vessel processing, with more than 500 workers and 150 technical engineers. It holds S and U stamps of ASME Standards, Class-A boiler manufacturing license, D1,D2 pressure vessel manufacturing license, boiler & pressure vessel inspection certificate of China.
It has developed a series of progress technologies in the field of manufacturing of boiler pressure vessel with more than 30 years technical accumulation and innovation. It has more than 100 invention patents and utility model patents in such area of boiler combustion. Our boiler products cover power plant boiler, steam boiler, hot water boiler, thermal oil heater, waste heat recovery steam boiler, steam generator, etc.
Products are widely used in power generation, biomass, electric heating, chemical industry, textile industry, food industry, paper industry, pavement, plastics, rubber, and wood industry, etc. Until now, there are more than ten thousand clients all over the world. Our products are not only served in China, but also exported to such countries/regions as USA, Japan, Australia, Russia, Vietnam, Philippine, Malaysia, Indonesia, Pakistan, Kazakhstan, Iran, Egypt, and Africa, etc.
Workshop View
Ceritificate
Overseas Exhibition
After Sales Service
SUTEX offers its customers the following services for industrial steam/hot water boiler, thermal oil boile/heater and waste heat recovery boilers and steam generators:
Customized boiler designs.
Super quality boiler product
Installation and commissioning service
Operators training service
Lifetime maintenance service.
Clients be all over the world
Field Installation&Commission
FAQ
Boiler FAQs
Q: What different types of boilers are available?
DZL type steam/hot water boiler
SZL type steam /hot water boiler
SHL type steam /hot water boiler
WNS type steam /hot water boiler
SZS type steam /hot water boiler
SZW type steam /hot water boiler
CFB type steam boiler
YLW type thermal oil boiler/heater
YYL(W) type thermal oil boiler/heater
WNS type thermal oil boiler/heater
SZS type thermal oil boiler/heater
SZW type thermal oil boiler/heater
Waste heat recovery boiler
Steam generator
Q: What is a fire tube steam boiler?
A fire tube steam boiler is a boiler where the combustion gases from the burner are channeled through tubes that are surrounded by the fluid to be heated. The boiler body is the pressure vessel and contains the fluid. In most cases, this fluid is water that will circulate for heating purposes or become steam for use in processing.
Each set of tubes through which the combustion gas passes, before making a turn, is considered a "step". Consequently, a three-step boiler will have three sets of pipes with the outlet located at the rear of the boiler.
Q: What's advantages of SUTEX boiler?
Wide Range of Fuel Type
Applicable for a various of light oil, furnace oil, natural gas, LNG, biogas, coke gas, methanol, biodiesel, etc.
High Thermal Efficiency
New and unique design with high thermal efficiency, which save running cost of buyer
Unique Control System
Unique three-elements control system with PID unit covered PLC, inverters, and HMI to reach high level automatic running of boiler
Q: What is the turndown ratio of SUTEX boilers?
SUTEX boilers feature turndown ratios of 5:1, means the boiler's minimum operating load is 20% of the boiler's full capacity (100% capacity)
Q: How do I choose the right boiler?
Firstly, check the actual steam pressure and consumption required at present, and discuss with management there are extra steam required or not in next five years.
Secondly, confirm the boiler fuel type, then SUTEX will provide you an optimal boiler that take all factors in consideration.
Q: How long does an industrial steam boiler last?
The normal service life of a steam boiler is 10 to 20 years, provided that proper care and maintenance routines are applied to the feedwater and interior of the boiler.
When considering steam boiler replacement, the three most important aspects to consider are safety, economy and changing requirements to perform the function for which it is operating.
Q: What services for industrial boilers does SUTEX offer?
SUTEX offers its customers the following services for industrial steam boiler, thermal oil boiler and waste heat recovery boilers and steam generators:
Customized boiler designs.
Super quality boiler product
Installation and commissioning service
Operators training service
Lifetime maintenance service.
Q: What safety features do steam boiler have?
Boiler shutdown protection due to water level low
Boiler shutdown protection due to continuous water level low
Boiler shutdown protection due to steam pressure high
Safety valve over pressure protection.
Automatic FWP on / off
Q: What is the lead time of SUTEX boiler
The subject boiler will be delivered within 60 -90 days based on boiler capacity
Q: What primary components for boilers are there?
The most common accessories are:
Burner
Economizer and condenser
Feed water pump
Thermal deaerator (if necessary)
Chimney
Control panel
Instrument gauges and valves
SUTEX supplies all types of complementary equipment for industrial steam boilers, and designs new equipment and tools if they are necessary for the final installation to meet its clients' expectations.
Q: What are the optional items of boiler for buyer choose from
Steam and feed water flow meter
Periodic blowdown expander (if necessary)
Continuous blowdown expander (if necessary)
Thermal deaerator (if necessary)
Q: What is the supply scope of boiler arranged by buyer
Whole civil works engineering by SUTEX design drawing
All connecting piping (steam, feed water piping)
All connecting cables (motor cables, single cables, main power supply cable)
Some connecting valves from feed water pump point
Chimney manufacture on site by SUTEX design drawing
Balance flue gas ducting manufacture on site by SUTEX design drawing
Thermal deaerator
Q: How does boiler warranty work?
The subject boiler is covered by a twelve months warranty against mechanical and/ or factory defects from date of test-run or 18 months from the date of shipment whichever comes earlier.
SUTEX shall repair or replace the components, parts or accessories covered by warranty that had become inoperative within the warranty period but not covered caused by faulty operation from the buyer.
SUTEX will provide lifetime service for boiler with cost when its warranty expired.
Q: Who will be fitting my new boiler?
Simply, a local professional boiler installing company will install the subject boiler under SUTEX engineer's instruction and supervision
Q: How long will my installation & commissioning take?
Typically, the whole installation & commissioning work may take 1-4 months based on the subject boiler capacity.
Q: How often should I maintain my boiler?
Overhaul inspection and maintenance: 1-3 month
SUTEX will provide detail brochure regarding how and when to do maintenance work during boiler running.
Address:
B201, 48 Ruanjian Daodao, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Jiangsu soho Honry Imp. &Exp. Co., Ltd is a state-owned company, which hold SUTEX BOILER brand, and select the boiler maker as our ODM, which is a professional manufacturing company, founded in 1991, for boiler and pressure vessel processing, with more than 500 workers and 150 technical engineers. It holds S and U stamps of ASME Standards, Class-A boiler manufacturing license, D1, D2 pressure vessel manufacturing license, boiler & pressure vessel inspection certificate of China.
It has developed a series of progress technologies in the field of manufacturing of boiler pressure vessel with more than 30 years technical accumulation and innovation. It has more than 100 invention patents and utility model patents in such area of boiler combustion. Our boiler products cover power plant boiler, steam boiler, hot water boiler, thermal oil heater, waste heat recovery steam boiler, steam generator, etc.
Products are widely used in power generation, biomass, electric heating, chemical industry, textile industry, food industry, paper industry, pavement, plastics, rubber, and wood industry, etc. Until now, there are more than ten thousand clients all over the world. Our products are not only served in China, but also exported to such countries/regions as USA, Japan, Australia, Russia, Vietnam, Philippine, Malaysia, Indonesia, Pakistan, Kazakhstan, Iran, Egypt, and Africa, etc.
){kind=link}